Basic Use Guide
Below are the sequential steps to scan items on the scanning station.
1. Power up PC
2. Power up scanner
3. Logon to PC
•
Novell username
•
Novell password
Kodak Capture Pro software should start automatically. If not please click on the Blue
"Capture Pro" icon on the desktop.
4. Starting a new job
(2)
New batch
The Scanning software will open to a "batch manager" dialog box (see above). On this screen select
"New" (1). (A new batch can be started at any time after initial login by clicking the "New Batch"
icon)
=
Mqpscan
=
scanmqp
(1)
New
(2)
Page 2 of 5