EPSON EPL-6200/EPL-6200L
2.2.3 Development Process (Imaging Cartridge)
2.2.3.1 OVERVIEW
The Developer Cartridge and development section are constructed as described below:
This printer employs one-component FMT (Fine Micro Toning) development
method.
Toner in the Developer Cartridge (toner cartridge) is sent into the toner sending
roller area by the toner agitation blade.
Then the toner, through the resin sleeve, is made to stick to the latent image area
produced by exposure to the laser beam on the OPC drum, thus a toner image is
formed.
The Imaging Cartridge consists of the Developer Cartridge (toner cartridge) and
the Photoconductor Unit (Drum Cartridge).
Operating Principles
Toner Containing Space
Toner Hopper
Toner Agitation Blade
1st Toner Blade
第 1 トナーブレード
Photoconductor Unit
Developer Cartridge
Figure 2-13. Development Process (Imaging Cartridge)
Description of Mechanisms
2nd toner blade
Imaging Cartridge
OPC Drum
Toner Sending Roller
Development Roller
2nd Toner Blade
Resin Sleeve
Bias Seal
Imaging
Cartridge
Revision A
78