Epson EPL-6200 Service Manual page 105

EPSON EPL-6200/EPL-6200L
Error Code C ffff
1000 Standard RAM Error (No RAM at all, etc.)
1001 Standard RAM Error (Not enough for minimum stack, etc.)
1002 Standard RAM Error (Not enough for standard size, etc.)
1020 RAM Error (slot 0)
1100 ROM Checksum Error (bit 0-15) (font)
1101 ROM Checksum Error (bit 16-31) (font)
1120 ROM Checksum Error (bit 0-7) (program)
1121 ROM Checksum Error (bit 8-15) (program)
1122 ROM Checksum Error (bit 16-23) (program)
1123 ROM Checksum Error (bit 24-31) (program)
1151 Main Unit ROM Checksum Error
1152 FONT-ROM Checksum Error
1153 PS Module Checksum Error
1180 Optional ROM module A checksum error
1185 Unsupported ROM module
1200 EEPROM writing error
1210 EEPROM writing limit
1400 Engine initialization error
1700 Built-in network hardware error
1999 Other hardware error
2000 Software error
: Lighting up
Troubleshooting
Table 3-2. Service Call Error (Controller-Related) (continued)
Explanation Paper LED Toner LED Memory LED
●
Overview
Ready LED Data LED Error LED
Revision A
Refer to
p.112
p.112
p.113
p.113
p.113
p.114
p.114
p.115
–
p.115
p.115
105