Epson EPL-6200 Service Manual page 42

EPSON EPL-6200/EPL-6200L
Layout
Table 1-43. Setting Items (Layout)
Item Dialog * 1
Zoom Option
(When Zoom Option is
ON)
Print Layout
Rotate by 180
*2
Duplex
(When Duplex is ON)
Note "*1": Click the button on the tab screen to open a dialog box for further setting items.
"*2": Duplex printing is restricted to the paper sizes of A4, B5 and LT.
Special
Table 1-44. Setting Items (Special)
Item Dialog * 1
Watermark
Form Overlay
Note "*1": Click the button on the tab screen to open a dialog box for further setting items.
Optional Settings
Table 1-45. Setting Items (Optional Settings)
Item Dialog * 1
Update the Printer Option Information Automatically
Update the Printer Option Information Manually
Installed Memory
Settings Optional Paper Sources
Duplex Print Unit
Status Sheet
Printer Settings (See "Printer Settings" (p.42))
Extended Settings (See "Extended Settings"
Note "*1": Click the button on the tab screen to open a dialog box for further setting items.
Product Description
Item Setting Value
ON/, OFF
Output Paper (Page size)
Zoom To 50 ~ 200% (in 1% increments)
Location Upper Left, Center
ON, OFF
ON, OFF
ON, OFF
Binding Left, Top, Right
Item Setting Value
ON, OFF
ON, OFF
Item Setting Value
ON, OFF
ON, OFF
8, 24, 40, 72, 136
No Optional Paper Source, Lower Cassette
ON, OFF
–
(p.43))
Printer Settings
Item
Sleep Mode
MP Tray Paper Size
Time Out
Speed
Parallel I/F Bi-D
Buffer Size
USB I/F Buffer Size
AUX I/F Buffer Size
Error Code
Page Protect
Toner Out Error
Auto Continue *
*2
Avoid Error
Dot Correction *
MP Tray Paper Type
Cassette 1 Paper Type
Reset OPC Level
Note "*1": Selects whether to continue printing processing at occurrence of some error, such as
"Print Overrun", "Paper Set", "Mem Overflow" or "Duplex Mem Overflow", by
releasing the printer from the error status automatically or to stop printing
processing.
ON: continue, OFF: stop (default)
"*2": Selects whether or not to avoid the occurrence of "Print Overrun" error in ESC/
Page mode.
ON: avoid, OFF: does not avoid (default)
"*3": Selects whether or not to make compensation at printing of extreme fine lines
(equivalent to 1 dot) in 1200 dpi to prevent breaks in each line.
Invalid when [Graphic Mode] = "High Quality (PC)"
ON: Dot correction, OFF, No dot correction (default)
Control Panel (EPL-6200)
Table 1-46. Printer Settings
Setting Value
Enable, Disable
A4, A5, B5, LT, HLT, LGL, EXE, GLG, GLT, F4, MON, C10, DL,
C5, IB5, C6
60 ~ 300 sec (in 10-sec steps)
Fast, Normal
ECP, Nibble, Off
Normal, Maximum, Minimum
Normal, Maximum, Minimum
Normal, Maximum, Minimum
Ignore, Space
Auto ON
Stop, Continue
1 ON, OFF
ON, OFF
3
ON, OFF
(Paper kind)
(Paper kind)
OK / Cancel
Revision A
42