EPSON EPL-6200/EPL-6200L
4.5.4 Main Motor
1.
Remove the Left Cover. (p.138)
2.
Disconnect the connector of the Main Motor. (See Figure 4-37)
3.
Remove the two screws, and remove the Main Motor from the printer.
4.5.5 Cooling Fan Motor
1.
Remove the Left Cover. (p.138)
2.
Disconnect the connector of the Cooling Fan Motor. (See Figure 4-38)
3.
Release the four hooks, and remove the Cooling Fan Motor.
Install the Cooling Fan Motor so that the labeled side is
positioned outside.
Install the Cooling Fan Motor so that it is caught by the
projection at the bottom left.
Disassembly and Assembly
Projection
Removal and Installation of Major Components
Figure 4-37. Main Motor Removal
Figure 4-38. Removing the Cooling Fan Motor
Revision A
Hook x4
155