Memory Module - HP Folio 13-2000 Maintenance And Service Manual

Memory module

Description
4-GB memory module (PC3, 12800, 1600-MHz)
Before removing a memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the base enclosure screws (see
5. Remove the keyboard (see
6. Remove the top cover (see
7. Disconnect the battery cable (see
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the
memory module. (The memory module tilts up.)
CAUTION:
the components on the memory module.
2. Slide the memory module forward (2).
3. Remove the memory module (3).
Reverse this procedure to install a memory module.
Keyboard on page
Top cover on page
Battery on page
To prevent damage to the memory module, hold it by the edges only. Do not touch
Base enclosure on page
26).
28).
32).
Component replacement procedures
Spare part number
641369-001
25).
41