Hard Drive - HP Folio 13-2000 Maintenance And Service Manual

Hard drive

Description
128-GB mSATA solid-state drive (SSD)
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the base enclosure screws (see
5. Remove the keyboard (see
6. Remove the top cover (see
7. Disconnect the battery cable (see
Remove the hard drive:
1. Remove the 2 Phillips PM 2.0×2.5 screws (1) that secure the hard drive to the computer. (The
hard drive tilts up.)
2. Pull the hard drive to the right(2).
3. Remove the hard drive (3).
Reverse this procedure to reassemble and install the hard drive.
40 Chapter 4 Removal and replacement procedures
Base enclosure on page
Keyboard on page 26).
Top cover on page 28).
Battery on page
25).
32).
Spare part number
672616-001