Table of Contents
Advertisement
Warning
As shown in the above diagram, the regulator
included must be used when connecting the
Miele hob.
– Any pipe connections must be made using a
thread sealant approved for gas connections.
Failure to correctly install these items could
lead to a gas leak and subsequent explosion.
– Do not use any regulator unless it has been
supplied by Miele Appliances.
Connect the gas supply to the pressure
regulator using a 1/2" gas line connector
between the shut-off valve and the pressure
regulator. Flexible harmonica-type stainless
steel pipe is recommended.
For USA only
The gas connection must be made in
accordance with the local codes, or in absence
of local codes, with the National Fuel Gas Code
ANSI Z 223.1.
Gas pressures for USA
Natural gas
Max. supply pressure:
Min. supply pressure:
Liquid propane gas, after converting this
appliance with conversion kit number AH102 C4U.
Max. supply pressure:
Min. supply pressure:
Manifold pressure:
– natural gas
– propane gas
1/2 psi
5˝ water column
1/2 psi
11˝ water column
4˝ water column
10˝ water column
13
Hide quick links:
Advertisement
Table of Contents
