Part Identification Chart - WeiderPro 831.15927.0 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included. If a part is missing, call 1-877-992-5999.
M6 Washer
M10 Washer M10 Locknut
(12)––4 (11)––2
(4)––4
M6 x 40mm
M4 x 19mm M6 x 16mm
M10 x 45mm Screw (7)––4
Screw (9)––1 Screw (21)––4 Screw (14)––4
M10 x 202mm Bolt (3)––2
5