PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in
the hardware kit, check to see if it has been preassembled. Extra hardware may be included.
M10 x 137mm Bolt (36)
M10 x 120mm Bolt (19)
M10 x 63mm Bolt (32)
M8 x 55mm Bolt (18)
M8 x 43mm Bolt (39)
M6 x 38mm Screw (30)
M6 x 16mm Screw (29)
M8 Locknut (17)
M10 Locknut (33)
6
M6 Washer (26)
M8 Washer (16)
M10 Washer (34)