Adjustment - WeiderPro 831.15927.0 User Manual

ADJUSTMENT

The steps below explain how to adjust the weight bench. Make sure that all parts are properly tightened each time
the weight bench is used. Replace any worn parts immediately. The weight bench can be cleaned with a damp
cloth and a mild, non-abrasive detergent; do not use solvents to clean the weight bench.
ADJUSTING THE BACKREST
To adjust the angle of the Backrest (19), raise the
19
Backrest and insert the lower end of the Backrest
Brace (10) into one of the adjustment slots in the
Frame (1).
10
1
Slot
ADJUSTING THE SEAT
18
To adjust the angle of the Seat (18), remove the
Seat Pin (13), raise or lower the Seat, and then
insert the Seat Pin into the Frame (1) and into one of
the adjustment slots in the Seat Frame (not shown).
13
1
9