Part Identification Chart - WeiderPro 831.15948.1 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included. If a part is missing, please call 1-877-992-5999.
M6 Washer
M10 Washer
M8 Washer
(33)––8
(35)––8 (28)––4
M8 Locknut
M10 Locknut
(36)––8 M12 Locknut
(30)––1
(26)––1
M6 x 20mm M6 x 65mm
M8 x 42mm Bolt
Screw (31)––4
Screw (32)––8
(34)––8
M10 x 20mm M10 x 80mm Screw (27)––4
Screw (29)––5
M12 x 132mm Bolt (25)––1
5