Part Identification Chart - WeiderPro 395 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in
the hardware kit, check to see whether it has been preassembled. Extra hardware may be included. If a
part is missing, call 1-877-992-5999.
M8 x 40mm
M8 x 20mm Flat
Screw (46)
Head Screw (43)
M8 Washer (40)
M10 x 65mm Bolt (48)
M8 x 20mm
Screw (47)
M10 Washer (41)
M10 x 68mm Carriage Bolt (54)
M10 x 25mm
Screw (49)
M10 x 77mm Carriage Bolt (53)
M12 Washer (42)
M12 x 80mm Bolt (50)
M10 Locknut (44)
M12 x 87mm Bolt (52)
M12 Locknut (45)
M10 x 145mm Bolt (55)
M12 x 147mm Bolt (56)
5