Part Identification Chart - WeiderPro Pro 435 Bench User Manual

PART IDENTIFICATION CHART

This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below
each part refers to the key number of the part, from the PART LIST on page 18 of this manual. Important:
Some parts may have been pre-assembled. If you cannot find a part in the parts bags, check to see if it
has been pre-assembled.
M10 x 80mm Bolt (35)
M10 x 75mm Bolt (51)
M8 x 70mm Bolt (67)
M10 x 70mm Bolt (18)
M10 x 65mm Bolt (40)
M8 x 57mm Bolt (39)
M10 x 52mm Carriage Bolt (64)
M6 x 38mm Bolt (16)
M8 Washer (38, 63)
M8 Nylon Locknut (13, 62)
M10 Nylon Locknut (19)
M10 x 20mm Bolt (50)
M6 x 16mm Bolt (15)
5
M6 Washer (25)
M10 Washer (24)
M4 x 8mm
Screw (34)