D-Link DCS-5230 User Manual page 51

Section 3 - Configuration
The content of the log file reveals useful information about the current configuration and connection logged after the
DCS-5230 starts up.
Enable remote log:
IP Address:
Port:
Current log:
D-Link DCS-5230 User Manual
This option enables the camera to
send camera log files to a remote
server.
The IP address of the remote
server.
The port number of the remote log
server. The default port is 514.
View the system log file. The content
of the file reveals useful information
about camera configuration and
connectivity status after the camera
boots up.
Log
51