D-Link DCS-5230 User Manual page 39

Section 3 - Configuration
Click the Preset Position button from the left side of the Setup screen to access settings that affect how the DCS-5230
Internet Camera can pan and move to preset locations.
Pan Speed:
Tilt Speed:
Pan/Patrol Speed:
Current Position:
Preset Position:
Dwelling Time:
D-Link DCS-5230 User Manual
Select the speed at which the camera will pan for a full cycle
from the drop-down list. Select a value between 0 and 10, 0
being the slowest setting.
Select the speed at which the camera will tilt for a full cycle
from the pull down menu. Select a value between 0 and 10,
0 being the slowest setting.
Select the speed at which the camera will pan during auto
patrol. Select a value between 1 and 3, 1 being the slowest
setting.
Enter a name for the position at which you would like to preset
the DCS-5230. Click Add to add the new preset position to
the Preset Locations list.
Using the drop-down list, you can choose and delete a preset
position by selecting it and clicking Delete.
Specify the number of seconds that the camera should remain fixed upon a specified preset position.
Preset Position
39