Section 3 - Configuration
Save to Local Hard Drive:
Load from Local Hard
Drive:
Restore to Factory Default:
Reboot Device:
Click Apply on this screen to restore the factory default settings. After confirmation, the system will restart and require
the DCC program to locate the IP address of the DCS-5230.
D-Link DCS-5230 User Manual
Clicking Save Configuration allows you
to save a copy of the camera's current
configuration to a location which you
specify.
If you have previously backed up a your
camera's configuration, you can restore
it using this menu. Click Browse, and
locate the file on your computer. Click
Load Configuration to restore the
backup. This will erase your current
settings.
This option will reset the camera back to
its factory default settings. This will erase
your current settings.
Clicking this button will restart the
camera.
System
48