D-Link DCS-5230 User Manual page 43

Section 3 - Configuration
Continuous:
Scheduled Recording:
D-Link DCS-5230 User Manual
Example: Using motion detection triggered recording and setting Prerecord to 5 seconds and Postrecord to
9 seconds, the camera will save video from 5 seconds before motion was detected to 9 seconds after motion
was detected.
This will set the camera to record continuously. This scheduling method can only be done when recording to
a Samba drive.
This will set the camera to automatically record video during the specified times in the table below. This
scheduling method can only be done when recording to a Samba drive.
After making any changes, click the Save Settings button to save your changes, or click the Don't Save
Settings button to discard your changes.
43