Image Setup - D-Link DCS-5230 User Manual

Section 3 - Configuration
The options in Image Setup allow you to adjust the settings for your IP camera sensor and image.
Brightness:
Saturation:
Contrast:
Frequency:
White Balance:
B/W:
Flip:
Mirror:
D-Link DCS-5230 User Manual
This adjusts the brightness of the camera
image. This is set to 35 by default.
This adjusts the color saturation of the camera
image. This is set to 40 by default.
This adjusts the contrast of the camera image.
This is set to 40 by default.
This option adjusts the camera sensor's to
prevent flickering under certain light sources,
such as florescent lights. This is set to Auto
by default.
By default the camera will automatically white
balance the image. You can turn off white
balancing by selecting Disable from the drop-
down box.
Ticking this checkbox will change the camera
image into black and white.
This will flip the image vertically.
This will flip the image horizontally in such a way that your left side will be on the left side of the screen and
vice versa.
Note: Mirror and Flip can be used if you choose to mount the DCS-5230 upside down on the ceiling.

Image Setup

33