D-Link DCS-5230 User Manual page 36

Section 3 - Configuration
This option allows you to set up Motion Detection on your IP camera. In order to use motion detection you must
first check the Enable Video Motion checkbox. You can then click on the video window and draw motion detection
zones by clicking and dragging your mouse. Red areas indicate areas that will be monitored for motion. The camera
also has a PIR sensor which is used to detect motion using a special infrared sensor. PIR is good at detecting
motion from live subjects such as people and animals.
Enable PIR:
Enable Video Motion:
Sensitivity:
Draw Motion Area:
Erase Motion Area:
D-Link DCS-5230 User Manual
Click this box to enable the PIR
sensor.
Click this box to enable video motion
detection.
This setting adjusts how sensitive the
camera will be to motion, where 100%
will be the most sensitive setting
and 0% will be the least sensitive
setting.
This will allow you to draw motion
detection zones when clicking and
dragging, or erase motion detection
zones when clicking and dragging
depending on which option you have
selected.
Clicking this button will clear all
motion detection zones.
After making any changes, click the Save Settings button to save your changes, or click the Don't Save
Settings button to discard your changes.
Note: If the camera is set to SXGA mode in Audio and Video, Motion Detection is disabled.
Motion Detection
36