D-Link DCS-5230 User Manual page 40

Section 3 - Configuration
Set as Home:
Patrol Selection:
D-Link DCS-5230 User Manual
Use the Set As Home button to set the current position as the home position. The Home position is the first
position the camera goes to after the camera boots. You can also recall the default home position, use the
Default Home button.
To use the Auto Patrol feature, select the desired preset positions from the Preset Locations list and add
them to the Selected Locations list by clicking Select. You can then select the order in which the camera will
patrol through the preset locations by selecting a location and clicking Up or Down. Click Remove to remove
a location from the list.
40