Modifying The Splash Screen; Bitmap Layout - ADTRAN IP 706 Administrator's Manual

Configuring Common Features
Table 8. Phone Customization Overview (Continued)
Parameter
PhoneLabel
RtpBase
SetupPassword
SiteOption
SystemPhonebook
TimeFormat

Modifying the Splash Screen

You can customize the IP phone's splash screen presented during boot up by downloading a 216 x 336
pixel, 16-color gray-scale bitmap file to the parameter IconPixmap. Most graphics programs can be used
to modify and save the file.
When defining the splash screen, always begin by using the provided default .bmp file. This makes it
easier to create accurate files. Use only the four colors (black, white, light gray, and dark gray) in the color
palette of the default file.

Bitmap Layout

The bitmap is built in blocks of 16 x 16 pixels. There are 14 x 21 blocks in the IP phone bitmap. The right
most block is only half the width of a normal block or 8 pixels. Each row is one block in height. The
bitmap begins the drawing at the top left corner of each block. Both the IP 706 and IP 712 phone models
use eight rows for the splash screen.
48
Customizes the label displayed on the top line of the phone (e.g., the user
name or company name).
Sets the base port from which the phone transmits and receives media.
Customizes the password for restricted administration settings on the phone.
Sets the option number that the phone will request during DHCP transactions.
If a value other than the default option 157 is set in a configuration file, the
phone will re-initiate DHCP procedures using the new option.
Indicates the file name of the system phone book file.
Indicates the clock format as either 12 hour with a.m./p.m., or 24 hour.
Copyright © 2011 ADTRAN, Inc.
ADTRAN IP 700 Series Phone Administrator Guide
Description
6AOSAG0001-31A