Blf Settings; Figure 12. Blf Settings Menu - ADTRAN IP 706 Administrator's Manual

Ip 700 series

Hide thumbs Also See for IP 706:

Table of Contents

IP 700 Series Phone Administrator Guide

BLF Settings

From the BLF Settings menu, you can configure the phone to monitor status groups (defined using the

SubsGrp.Uri parameter) on the NetVanta 7100 and automatically update the line keys accordingly. When

status groups to which the phone is subscribed are updated using the NetVanta 7100, a list of busy lamp

field (BLF) members is sent out to the phone. The BLF members are dynamically placed on line keys not

occupied by Line or DND line keys. For more information on status groups, refer to the

Administrator's Guide

(ADTRAN's Knowledge Base article 2292).

Both BLF and Speed members are dynamically assigned to line keys. BLF members have a

higher priority when filling link keys not occupied by Line or DND buttons. Any line keys

remaining after all members from the subscribed BLF groups have been placed are

assigned to Speed members.

When the phone is subscribed to multiple status groups, BLF members are placed on the line keys using

the Option Number as a priority setting. For example, if the phone is subscribed to SubsGrp.Uri

distribution@192.168.0.23 using Option Number 1 and SubsGrp.Uri sales@192.168.0.23 using

Option Number 2, the BLF members of the distribution status group will be placed on unused line keys

before the BLF members of the sales status group. To configure the BLF settings, select the Option

Number first, then select the subscription type and subscription line, and enter the URI of the status group.

To remove the configured values (shown in parentheses after the setting name), select Clear Manual

Settings.

To change the current configured values, follow these steps:

1. Enter a new value in the corresponding field.

2. Select Save Manual Settings.

6AOSAG0001-31A

Using the Administrator's Web Interface

NetVanta 7100

Table of Contents

Show Quick Links

Table of Contents