Using the Administrator's Web Interface
Network Settings
From the Network Settings menu, you can change the IP address, gateway, and subnet mask. This menu
also allows you to enable and set DHCP, duplex negotiation speeds, server type, virtual local area network
(VLAN) IDs, HTTP server, and Internet Control Message Protocol Address Resolution Protocol (ICMP
ARP) timeout.
To remove the configured values (shown in parentheses after the setting name), select Clear Manual
Settings.
To change the current configured values, follow these steps:
1. Enter a new value in the corresponding field.
2. Select Save Manual Settings.
26
ADTRAN IP 700 Series Phone Administrator Guide
Figure 7. Network Settings Menu
Copyright © 2011 ADTRAN, Inc.
6AOSAG0001-31A