Setting The Realm; Setting The Domain; Assigning Line Key Functions; Table 4. Realm Settings - ADTRAN IP 706 Administrator's Manual

Configuring Common Features
#True since we will assign this line to more than 1 line button (MCA).
Reg.0.Multiple true
#General PBX type line.
Reg.0.Realm gp
#Link it to the previous Servers we defined where it will Register.
Reg.0.Servers 1
#Not a shared line.
Reg.0.Shared false
#Request-URI for calls forwarded to voicemail.
Reg.0.Voicemail *98

Setting the Realm

The realm specifies the type of phone system in which the lines are being configured. This setting provides
the dial plan to be used.
address-based configuration file for each phone. Refer to
setting up the dial plan parameters.
Value
General External (GE)
Private External (PE)
General PBX (GP)
General Intercom (GI)

Setting the Domain

Setting the domain in the Reg.x.Domain parameter is optional. It is used to form Invite URIs and
registration Request URIs that have a domain after the @ symbol instead of an IP address or FQDN from
the proxy or registrar server.

Assigning Line Key Functions

The line keys are numbered from 1 to 6 on the IP 706 phone and from 1 to 12 on the IP 712 phone. The
42
Table 4 below lists the available settings for Reg.1.Realm defined in the MAC

Table 4. Realm Settings

Used for general non-PBX-type outside lines. Lines of
this type use the DialPlanExternal dial plan.
Used for private (few users) non-PBX-type outside lines.
Lines of this type use the DialPlanExternal dial plan.
Used for PBX call appearances that require an additional
digit, such as 9 to be dialed to access outside numbers.
Lines of this type use the DialPlanPbx dial plan.
Used for intercom lines configured for key system
operation. Lines of this type use the DialPlanIntercom
dial plan.
Copyright © 2011 ADTRAN, Inc.
ADTRAN IP 700 Series Phone Administrator Guide
Appendix B on page 81
Description
for more information on
6AOSAG0001-31A