Sagem LASER PRO 344 User Manual page 76

Insert the chip card (supplied with the drum cartridge) into the card reader ensuring that the chip
is entered as shown in the drawing below.
The following is displayed on the scanner control panel screen:
CHANGE DRUM ?
YES= OK - NO= C
Press OK
Once the chip card has been read, the display shows:
DRUM OK
REMOVE CARD
Remove the card
Caution -
If the following is displayed, check that you have inserted the chip card the right way up:
CANNOT READ CARD
REMOVE CARD
Caution -
If this message appears, remove the chip card and insert it the other way around (green
arrow).
CANNOT READ
CHECK DIRECTION
green arrow
6-12
Maintenance