Sagem LASER PRO 344 User Manual page 70

Press OK on the scanner keypad. The display shows:
TUE 02 APR 13:39
INSERT GAUGECARD
Insert chip card (supplied with the toner cartridge) into the card reader ensuring that the chip is
entered as shown in the drawing below.
The following is displayed on the scanner control panel screen:
CHANGE TONER ?
YES= OK - NO= C
Press OK
Once the chip card has been read, the display shows:
TONER OK
REMOVE CARD
Remove the card
Caution -
If the following is displayed, check that you have inserted the chip card the right way up:
CANNOT READ CARD
REMOVE CARD
Caution -
If this message appears, remove the chip card and insert it the other way around (green
arrow).
CANNOT READ
CHECK DIRECTION
green arrow
6-6
Maintenance