Telephone Connection; Power Line Connection And Switch-On - Sagem LASER PRO 344 User Manual

Make sure the On/Off switch is set to 0 (Off).
Key to the diagram:
A: Telephone line connector
B: AC power connector
(model depending on country)
1: Line cord
(model depending on country)
2: AC power cord
(model depending on country)
T
ELEPHONE CONNECTION
Plug end of the telephone line (1) into the connector on the fax machine (A), and the other end
into the wall telephone socket.
P
OWER LINE CONNECTION AND SWITCH
Caution -
Refer to safety procedures in the Safety Chapter.
Plug end of the main power cord (2) into the connector (B) on the fax machine, and the other end
in the wall outlet.
Set the On/Off switch to position 1 (On).
After a few seconds, when the printer has warmed up, the date and time will appear.
1-16
Installation
-
ON