Transmission With Auto Redial; Rerouting - Sagem LASER PRO 344 User Manual

Operation

Transmission with auto redial

This function allows you to monitor the dialling operation during a fax transmission. In this case,
the maximum transmission rate will be 14400 bps.
This function allows for example:
• to hear if the subscriber's fax is engaged and if so, choose the moment when the line is clear
to start the document transmission
• to control the communication progress in case of uncertain numbers, etc
To take the line manually:
Place the document in the fax feeder
Press
If necessary, set the sound level with navigator
If not already done, enter the subscriber number (or refer to paragraph From the redial
key, page 5-3 to call back the last subscriber)
As soon as you hear the remote fax tone, the line is clear and you can start the transmission.
Press
If your machine is set in order to print a transmission report (refer to paragraph Main settings,
page 3-1), the reduced copy of the document first page will not be printed and it notifies you that
the communication is manual.

Rerouting

This function is used to reroute faxes received to a directory contact. To use this function, you
have to perform two operations: set the rerouting address of the fax and activate rerouting.
Activate rerouting
Using the keys or within the navigator select option >>3911 WITH.
Confirm with the OK key.
Remark : If the function WITHOUT is selected the menus 392 and 393 will not be included in the functions over-
view, when it is printed out.
Set the re-direction contact
Using the keys or within the navigator select the subscriber from the directory (If the
directory is empty the display will show DIRECTORY EMPTY). Enter the number of
to start the document transmission
M 392 OK - FAX / REROUTING / DESTINATION
5-5
or keys
M 391 OK - FAX / REROUTING / ACTIVATION