Lcd Screens - La Crosse Technology WS-7095U Instruction Manual

C. WEATHER CENTER
1. Remove the battery cover. To
do this, place a solid object in
the space provided at the lower-
central position of the battery
cover (the cover has white
writing on it) then push up and
pull out on the battery cover.
2. Observe the correct polarity, and
install three C batteries.
3. Replace the battery cover.
THE LCD SCREENS
Immediately after the batteries have been installed, the LCD (Liquid Crystal
Display) Screens will completely light up for a brief moment. There are 6 LCD
Screens, each displaying different information.
Note: After the LCD Screens briefly light up, "267" will appear in the LCD 1,
then the LCD's will display the default settings. A low-battery warning-icon
appears in LCD 1 beside the "TIME" icon (this should not be on). There is also
a satellite icon that appears in LCD 6, under the "MAX" icon—this icon
informs the user that the Weather Center is receiving signals from the sensors.
Within 12 minutes the Outdoor temperature and humidity should be displayed—
if not, remove batteries from all units and repeat battery installation.
Following is a general display
description of each LCD. Details
concerning the LCD Screens will be
explained during the complete
Programming sections and the Features
& Operations sections.
LCD 1—shows the time.
LCD 2—moon phases and dates.
LCD 3—indoor temperature/humidity.
LCD 4—forecast icons and air pressure.
LCD 5—rainfall/air pressure histories,
and rain quantity.
LCD 6—outdoor temperature/humidity.
5
Battery
Cover
Battery
Compartment
LCD 1
LCD 2
LCD 3
LCD 4
LCD 5
LCD 6