Advertisement
Quick Links
World Time Center
Introduction
Congratulations on purchasing this state-of-the-art World Time Center as an example of superior design and
engineering. Providing radio controlled time, indoor temperature and humidity displays, outdoor temperature, this unit will
never keep you guessing on time, date or current and future weather conditions. Operation of this product is simple and
straightforward. By reading this operating manual, the user will however receive a better understanding of the WorldTime
Center together with the optimum benefit of all its features.
World Time Center
LCD1
LCD2
LCD3
SET-Key
WORLDTIME-Key
TIMEZONE-Key
LANGUAGE-Key
Outdoor temperature sensor
LCD display
Features
World Time Center
•
4 digits showing Hour and Minute in the main display
•
WWVB time signal radio-controlled clock with manual time display
•
12/24 hour display
•
Time zone selectable
•
World time display with specific place represented by 3 sucessive characters
•
Calendar display
•
Display of weekday (8 languages to choose from)
•
Display of current indoor temperature
•
Display of current indoor relative humidity
•
Three weather icons for weather forecasting
•
Weather tendency indicators
•
°C or °F temperature display selectable
•
LCD contrast changeable to 8 different tones
•
Low battery indicator
•
Wall Mounting
Hanging Hole
Battery cover
+ -Key
Keys are on back for:
HYGRO-Key
WS-7097U
WS-7092U
Holder
Outdoor temperature sensor
•
Remote transmission of outdoor temperature via 433MHz to base World Time Center.
•
LCD display showing current outdoor temperature in Fahrenheit (ºF)
•
Shower proof casing
•
Wall mounting case
Getting started
Remove all parts from the packaging and place onto a table in front of you. Ensure that the following parts are included:
1.
World Time Center (main unit)
2.
Outdoor temperature sensor
3.
Instruction manual
If any one of the above mentioned parts is missing please contact your supplier.
Please follow all further explanations and descriptions in this manual in order to ensure that your World Time
Center and Outdoor temperature sensor work correctly.
Important Note:
For all users wanting to get additional informations on the function of the World Time Center there is an
alphabetically sorted subject index at the end of this manual offering a number of technical and functional
explanations. For use and operation of this product however the knowledge of this index is not necessary.
Putting into Operation
Basic Setup
Battery
Compartment
1.
Open the battery cover of the World Time Center and - checking the correct polarities –
insert 3 x AA, IEC LR6 1.5V batteries into the battery compartment as indicated above and replace the cover.
2.
Unscrew the screw on the back of the Outdoor temperature sensor compartment and remove the cover.
3.
Insert the 2 x AAA, IEC LR3, 1.5V batteries observing correct polarity.
4.
Replace battery cover on unit and seal by re-screwing
5.
When replacing the battery covers, ensure that the batteries do not spring free from the contacts.
6.
Your World Time Center and Outdoor temperature sensor are now operational.
Reset
Battery Cover
Battery cover
Battery
compartment
Advertisement
Related Manuals for La Crosse Technology WS-7097U
Summary of Contents for La Crosse Technology WS-7097U
- Page 1 For use and operation of this product however the knowledge of this index is not necessary. SET-Key Putting into Operation WORLDTIME-Key + -Key Basic Setup Keys are on back for: HYGRO-Key WS-7097U TIMEZONE-Key WS-7092U LANGUAGE-Key Outdoor temperature sensor Battery Battery Cover Compartment Open the battery cover of the World Time Center and - checking the correct polarities –...
- Page 2 To reset the World Time Center and the Outdoor temperature sensor, simply take out the batteries from both unit. Wait • In normal mode display of radio controlled, highly accurate time of day depending on programming - 12 or 24 hours for at least 30 seconds and repeat the setup procedure above.
- Page 3 12/24 Hours Setting • Serves the selection of the displays of current date with weekday, worldtime with location or alternating display of both above modes every 5 seconds on LCD 1. After entering the programming mode as described above the 12/24 hours display can be selected on LCD 2 in the following way: TIMEZONE Key The “12h”...
- Page 4 The hour digits of the worldtime on LCD 1 will start flashing. Select the desired hour by use of the “+” key. Setting Positioning of minutes is neither possible nor necessary. Press the “SET” key to move on to the “ °C/°F Setting”. Positioning of World Time Center °C/°F Setting Hanging...
-
Page 5: Specifications
• • Should the World Time Center be exposed to extreme and sudden temperature changes, it will lead to rapid This product has been designed for strict use in the home as an indicator of the future weather and is not 100% changes in its readings and thereby reduce its accuracy. - Page 6 The time base for radio controlled time and date is a operated by the NIST radio station WWVB in Ft. Collins, Colorado. WWVB broadcasts are used by millions of people throughout the United States to synchronize electronic products like clocks, clock radios and wristwatches. WWVB continuously broadcasts time and frequenzy signals at 60kHz and the time information received and displayed is absolutely accurate regardless of summer or wintertime.
- Page 7 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.