Advertisement
Quick Links
Congratulations on purchasing this state-of-the-art Weather Station as an example of fine design and quality piece of engineering. The operation of this product is simple and
straightforward. By reading this instruction manual, users will receive a better understanding of the Weather Station together with the optimum benefit of all its features.
The Weather Station
LCD
Display
RESET
key
The Temperature Transmitter
Features of the Weather Station
•
4 digits LCD time display
•
Current indoor temperature display in degree Fahrenheit
•
Simultaneous minimum and maximum indoor temperature recordings
•
Current relative humidity display with "☺" Smilling or " " Sad face for comfort level
reading.
•
3 weather icons for weather forecasting
•
Weather tendency indicator
•
Relative air pressure inHg with adjustable reading ranges
•
Air pressure history for the past 72 hours (electronic barometer with barometric pressure and trend)
•
Current outdoor temperature display in degree Fahrenheit
•
Simultaneous minimum and maximum outdoor temperature recordings.
•
LCD contrast changeable to 8 different tones
•
Low battery indicator
•
Wall mounting
Features of the Temperature Transmitter:
•
Remotely transmits outdoor temperature at 433MHz to the Weather Station
•
With wall mounting holder
Getting Started
Please follow these steps to ensure that your new Weather Station and Temperature Transmitterwork correctly together:
Remove all pieces from the packaging and place onto a table in front of you.
Check that you have complete:
1.
Weather Station
2.
433MHz temperature transmitter
3.
Sealed pack with 3 screws and double-sided tape for wall mounting the transmitter
Setting up
Battery
cover
Battery compartment
+ key
1.
Slide open the battery cover of the transmiter as indicated above.
2.
Checking the correct polarization, insert the 2 x AAA, IEC LR3, 1.5V batteries into the battery compartment.
3.
Replace the cover while ensuring the batteries do not spring free from the contacts as this may cause transmission start up problems.
4.
Within 2 minutes of step 3, checking the correct polarization, insert 2 x AA, IEC LR6, 1.5V battery into the battery
Wireless Weather Station
Instruction Manual
Hanging Hole
Battery
compartment
Function keys
Battery
compartment
Battery
cover
SET Key
Holder
Advertisement
Related Manuals for La Crosse Technology WS-7091UD
Summary of Contents for La Crosse Technology WS-7091UD
- Page 1 Congratulations on purchasing this state-of-the-art Weather Station as an example of fine design and quality piece of engineering. The operation of this product is simple and straightforward. By reading this instruction manual, users will receive a better understanding of the Weather Station together with the optimum benefit of all its features. The Weather Station Display RESET...
- Page 2 compartment. Replace the front cover while ensuring that the batteries do not spring free from the contacts as this may cause transmission start up problems (should this happen see Resetting below) Your Weather Station is now operational. Note: For securing the product into place, please see “Positioning the Temperature Transmitter“ and “Positioning the Weather Station“ below. When setting up, always remember to insert the batteries into the transmitter first as this will start the 433MHz transmission signal for the Weather Station to pick when it is actived (always ensure batteries being used are new and of correct sizes).
- Page 3 Temperature in degree Fahrenheit Smilling / Sad face Minimum and maximum indoor icons for comfort temperature reading reading Weather icons Weather tendency indicator Relative air pressure inHp Air pressure history Outdoor temperature in degree Fahrenheit Minimum and maximum outdoor temperature reading After inserting the batteries, all the segments on the LCD will light up briefly before displaying the time and all the other modes.
- Page 4 location as being a possible change in air-pressure when really it is due to the slight change of altitude. Again, disregard weather forecasts for the next 12 to 24 hours as this will allow time for operation at a constant altitude. The weather tendency indicator Working together with the weather icons are the weather tendency indicators (located above and belowthe weather icons).
- Page 5 Note: When the 433MHz signal is received correctly, do not re-open the battery cover of either the transmitter or Temperature station, as the batteries may spring free from the contacts and force a false reset. Should this happen accidentally then reset all units (see Resetting below) otherwise transmission problems may occur. The transmission range is around 25 m from the transmitter to the Temperature station (in open space).
-
Page 6: Warranty Information
Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. - Page 7 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.