Engine Adjustments; Starting The Engine - Husqvarna Royal 153 S Instruction Manual

A A A A A
1 Upper handles
2 Lower handles
3 Fastening knobs for upper handles
4 Grass catcher
5 Oil filler cap
6 Oil drain plug
B B B B B
C C C C C
D D D D D
E E E E E
F F F F F
G G G G G
H H H H H
l Always operate with the deflector or grasscatcher in the correct position.
l Always stop the engine before removing the grasscatcher or adjusting the height of cut.
l Never place your hands or feet underneath the deck or into the rear grass discharge chute while the engine is running.
I I I I I
Before mowing, remove all foreign objects from the lawn which may be thrown by the machine. While mowing, stay alert for any foreign objects which may have been
missed.
Never lift the rear of the mower while starting the engine or during normal operation.
J J J J J
Never place your hands or feet underneath the deck or into the rear discharge chute while the engine is running.
K K K K K

ENGINE ADJUSTMENTS

Refer to the engine manufacturer's maintenance manual.
CAUTION:- 0.6l Oil must be added to the engine before use.
a) Engines with choke system:
when the engine is cold, position the accelerator lever (13) on START
L L L L L

STARTING THE ENGINE

Once the machine has been set up properly, start the engine as follows:
b)Operate the engine stop lever (14) to prepare the engine for start, keep lever pressed against handle while starting and using the machine - it operates the engine brake.
c) Engines with primer system:
Press the fuel-enrichment pump (Picture 'K' item 36) located on the carburettor 3 or 4 times position the accelerator lever (13) on MAX.
For further information and explanations, read carefully the user instruction manual of the engine.
M
M M M M M
d) Start engine.
MANUAL STARTING: (While holding the engine stop lever (14)).
lHold the engine start-grip (11) and pull the starter rope gently until you feel the resistance caused by compression. Return the starter rope slowly then pull the handle
firmly towards you to its full extent.
N N N N N
ELECTRICAL STARTING : (While holding the engine stop lever (14)).
lInsert the plug (G) in the socket (H) on the engine. Turn the ignition key (17).
CAUTION: The blade starts turning as soon as the engine is started.
O O O O O
Keep the engine stop lever (14) depressed during machine operation. When the lever is
released, the engine stops.
MOWING
To cut the grass, push the lawn mower manually or insert the automatic advance gear.
7 Deck
8 Adjusting levers for cutting height
9 Spark plug
10 Fuel cap
11 Engine start-grip
12 Rear deflector
13 Throttle lever
Self-Propelled/ Electric Start Lawnmower.
Remove the bail arms, attach cables as shown and re-fit the bail arms.
3 Speed Self-Propelled/Electric Start Lawnmower.
Remove the bail arms, attach cables as shown and re-fit the bail arms.
Self-propelled Lawnmower with Blade Brake.
Remove the bail arms, attach cables as shown and re-fit bail arms.
3 Speed Self-Propelled Lawnmower with Blade Brake.
Remove the bail arms, attach cables as shown and re-fit the bail arms.
How to insert automatic advance: Lift up the clutch handle (18) and keep it pressed in
position.
CAUTION: Engage the gear only when the engine is running.
How to disengage advance: Release the clutch handle.
9
14 Engine stop lever
15 Reduction gear
16 Console
17 Ignition key
18 Clutch lever
19 Blade engagement lever
20 Handle advance speed
ENGLAND