Cursor To Waypoint (Chart Or Combo View Only); Save Current Track; Clear Current Track; Save Current Route (Only When Navigating) - Humminbird 383c Operation Manual

531450-1_A - 383c_Eng.qxd 11/18/2005
Cursor to Waypoint
(Chart or Combo view only)
Cursor to Waypoint allows you to quickly move the cursor to any saved waypoint, so
that you can locate it or edit it.
NOTE: This X-Press TM menu item appears only if you have saved waypoints.
To move cursor to a saved waypoint:
1. Highlight Cursor to Waypoint on the Navigation X-Press
2. Use the RIGHT 4-WAY Cursor Control key to initiate Cursor to Waypoint.
3. Use the UP or DOWN 4-WAY Cursor Control key to highlight the waypoint you
wish to move the cursor to, then use the RIGHT 4-WAY Cursor Control key to
select the destination waypoint.

Save Current Track

Save Current Track allows you to save the current track
being displayed. After the current track is saved, a new current track is started.
To Save Current Track:
1. Highlight Save Current Track on the Navigation X-Press
2. Use the RIGHT 4-WAY Cursor Control key to initiate saving the current track.
3. The Confirm dialog box will appear. To save the current track, press the RIGHT
Cursor key once more. To cancel saving the current track, press the LEFT Cursor key.

Clear Current Track

Clear Current Track allows you to clear the current track
being displayed and start a new track at the present position.
To Clear Current Track:
1. Highlight Clear Current Track on the Navigation X-Press
2. Use the RIGHT 4-WAY Cursor Control key to initiate clearing the current track.
3. The Confirm dialog box will appear. To clear the current track, press the RIGHT
Cursor key once more. To cancel clearing the current track, press the LEFT Cursor key.
2:37 PM Page 50
TM menu.
TM menu.
TM menu.
43
Save Current Route
(only when Navigating)
Save Current Route allows you to save the current route being displayed. This menu
choice will only appear when you are currently navigating a route.
To Save Current Route:
1. Highlight Save Current Route on the Navigation X-Press
2. Use the RIGHT 4-WAY Cursor Control key to initiate saving the current route.
3. The Confirm dialog box will appear. To save the current route, press the RIGHT
Cursor key once more. To cancel saving the current route, press the LEFT Cursor key.

Skip Next Waypoint

(only when Navigating)
Skip Next Waypoint removes the next waypoint from the current route. This menu
choice will only appear when you are currently navigating a route.
To Skip Next Waypoint:
1. Highlight Skip Next Waypoint on the Navigation X-Press
2. Use the RIGHT 4-WAY Cursor Control key to initiate skipping the next waypoint.
3. The Confirm dialog box will appear. To skip the next waypoint, press the RIGHT
Cursor key once more. To cancel skipping the next waypoint, press the LEFT
Cursor key.
44
TM menu.
TM menu.