Sonar X-Press Menu; (Sonar Views Only); Sensitivity - Humminbird 383c Operation Manual

531450-1_A - 383c_Eng.qxd 11/18/2005
Sonar X-Press

(Sonar views only)

The Sonar X-Press
most frequently-used. Press the MENU key once while in
any of the Sonar Views to access the Sonar X-Press
NOTE: Menu choices will vary depending on system settings
such as whether the unit is set for Advanced User mode or what
transducer is currently selected.
Sonar X-Press TM Menu
2:37 PM Page 42
TM Menu
TM menu provides access to the settings
TM menu.
35

Sensitivity

Sensitivity controls how much detail is shown on the
display and will adjust the sensitivity of all sonar frequencies. Increasing the sensitivity
shows more sonar returns from small baitfish and suspended debris in the water;
however, the display may become too cluttered. When operating in very clear water or
greater depths, increased sensitivity shows weaker returns that may be of interest.
Decreasing the sensitivity eliminates the clutter from the display that is sometimes
present in murky or muddy water. If Sensitivity is adjusted too low, the display may not
show many sonar returns that could be fish.
NOTE: The Sensitivity setting is a global setting and will adjust the sensitivity of all sonar
frequencies, as compared to specific sensitivity adjustments (such as 83 kHz Sensitivity) that
allow you to adjust the level of sensitivity for one specific beam at a time.
Sensitivity at Low Sensitivity at Medium
To adjust the Sensitivity:
1. Highlight Sensitivity on the Sonar X-Press
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the
Sensitivity setting. (Low = 1, High = 20, Default = 10)
36
Sensitivity at High
TM menu.