Cursor To Waypoint (Chart Or Combo View Only); Save Current Track; Clear Current Track - Humminbird 737 GPS Operation Manual

Cursor to Waypoint allows you to quickly move the cursor to any saved waypoint, so that you can
locate it or edit it.
NOTE This X-Press
To move cursor to a saved waypoint:
1. Highlight Cursor to Waypoint on the Navigation X-Press
2. Use the RIGHT 4-WAY Cursor Control key to initiate Cursor to Waypoint.
3. Use the UP or DOWN 4-WAY Cursor Control key to highlight the waypoint you wish to
move the cursor to, then use the RIGHT 4-WAY Cursor Control key to select the
destination waypoint.
displayed. After the current track is saved, a new current track is started.
To Save Current Track:
1. Highlight Save Current Track on the Navigation X-Press
2. Use the RIGHT 4-WAY Cursor Control key to initiate saving the current track.
3. The Confirm dialog box will appear. To save the current track, press the RIGHT Cursor key
once more. To cancel saving the current track, press the LEFT Cursor key.
displayed and start a new track at the present position.
To Clear Current Track:
1. Highlight Clear Current Track on the Navigation X-Press
2. Use the RIGHT 4-WAY Cursor Control key to initiate clearing the current track.
3. The Confirm dialog box will appear. To clear the current track, press the RIGHT Cursor key
once more. To cancel clearing the current track, press the LEFT Cursor key.
Cursor to Waypoint
(Chart or Combo view only)
TM
menu item appears only if you have saved waypoints.

Save Current Track

Save Current Track allows you to save the current track being

Clear Current Track

Clear Current Track allows you to clear the current track being
TM menu.
TM menu.
TM menu.
57