Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Humminbird AS GR4
Summary of Contents for Humminbird AS GR4
- Page 1 GR4 GPS Receiver GR4 GPS Receiver Accessory Manual Accessory Manual 531248-1-B...
-
Page 2: Table Of Contents
Thank You! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® accessory is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® accessory does require repairs, we offer an exclusive Service Policy - free of charge during the first year after purchase, and available at a reasonable rate after the one-year period. -
Page 3: Gr4 Gps Connection Kit
NOTE: Entries in this Table of Contents which list (with PC Connect Cable Only) require the purchase of a separate accessory. You can visit our website at www.humminbird.com to order these accessories online or contact our Customer Resource Center at 1-334-687-0503. -
Page 4: Connecting A Gr4 Gps Receiver To The Matrix
Connecting a GR4 GPS Receiver to the Matrix Here's how to access GPS functionality using your GR4 GPS Receiver Accessory: 1. Attach the GR4 GPS receiver to your Matrix Control Head COM port using the NMEA cable attached to the antenna. 2. -
Page 5: Stem Mount With 1" - 14 Thread
NOTE: 10’ extension cables may be purchased from Humminbird if your planned cable route exceeds 20’ (6 m). Maximum cable length, including extension cables, should not exceed 50’ (16 m). Visit our website at www.humminbird.com, or call our Customer Resource Center at 1-334-687-0503 to purchase extension cables. -
Page 6: No Access Under Mounting Location
Matrix control head to the planned mounting location of the GPS Receiver. NOTE: 10’ extension cables may be purchased from Humminbird if your planned cable route exceeds 20’ (6 m). Maximum cable length, including extension cables, should not exceed 50’ (16 m). Visit our website at www.humminbird.com, or call our Customer Resource Center at 1-334-687-0503... -
Page 7: Track View
Track View Track View - This view shows the current track (also known as the position history or breadcrumb trail) showing where the boat has been, along with saved tracks, waypoints, and the current route (when navigating). Track View with Active Cursor Depth Track Scale Latitude and... -
Page 8: Introduction To Navigation
Introduction to Navigation Use the Matrix Fishing System to establish waypoints at areas of interest and to navigate to those waypoints via a route (representing the shortest intended distance between waypoints). You can also view and save tracks, which represent the actual path of the boat. Waypoints, Routes and Tracks Waypoints are stored positions that allow you to mark areas of interest or navigation points. -
Page 9: Navigate To A Waypoint Or Position
Delete a waypoint: From the Waypoints submenu, select Delete and press the RIGHT Cursor key to display a list of waypoints. Select the waypoint you want to delete, then press the RIGHT Cursor key. You will be asked to confirm deletion before the waypoint is actually deleted. Navigate to a Waypoint or Position Navigate to the cursor position: From the Track or Combo view, use the Cursor key to select a position or waypoint to which you want to navigate. -
Page 10: Edit, Delete Or Hide Saved Tracks
Edit, Delete or Hide Saved Tracks Display the Tracks Submenu: From any view, press the MENU key twice to display the Main Menu System, then use the RIGHT Cursor key to select the Navigation tab. Select Tracks and press the RIGHT Cursor key to display the Tracks submenu. -
Page 11: Start-Up Options Menu
User Mode (Normal or Advanced) - An Advanced Mode is provided for users who desire the highest level of control over the Matrix Fishing System and Normal Mode for users who desire greater simplicity and fewer menu choices. Additional Advanced menu choices will be displayed throughout the menu system when you navigate to specific menus while in Advanced Mode. -
Page 12: Simulator
PC Connect Cable. Complete instructions are included with the PC Connect Cable accessory. NOTE: The PC Connect Cable requires a separate purchase. For more information visit our website at www.humminbird.com or contact our Customer Resource Center at 1-334-687-0503. Exit PC Connect mode by powering the Matrix Fishing System off. -
Page 13: Mark
Sonar X-Press Menu (Sonar Views Only) The Sonar X-Press menu provides access to the settings most frequently-used. Press the MENU key once while in any of the Sonar Views to access the Sonar X-Press NOTE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode. -
Page 14: Save Current Track
Go To Go To allows you to start Navigation towards a waypoint. If the Cursor is active, choosing Go To creates a waypoint and starts navigation towards that waypoint; if the Cursor is not active, choosing Go To displays the list of waypoints, so that you can select the waypoint towards which you want to navigate. -
Page 15: Remove Grid (Only If Grid Is Active)
Remove Grid (Only if a Grid is Active) Remove Grid removes the waypoint grid from the display. This menu choice will only appear when a grid has already been applied to a waypoint. To Remove a Grid: 1. Highlight Remove Grid on the Navigation X-Press menu. -
Page 16: Waypoints
Waypoints Waypoints allows you to view the Waypoints submenu. To view the Waypoints Submenu: 1. Highlight Waypoints on the Navigation main menu. 2. Use the RIGHT 4-WAY Cursor Control keys to view the Waypoints submenu. Waypoints Submenu The Waypoints Submenu contains the following menu choices: Create allows you to create a new waypoint and edit it immediately. -
Page 17: Track Min Distance (Advanced)
Track Min Distance (Advanced) Track Min Distance allows you to set a minimum distance of travel before a trackpoint is added to the track. NOTE: Track Min Distance works in conjunction with Trackpoint Interval. Both conditions must be met before a trackpoint is added to the current track. NOTE: See Setup Menu Tab: User Mode in your Matrix Fishing System Operations manual. -
Page 18: Arrival Alarm
To change the Off Course Alarm setting: Off Course Limits 1. Highlight Off Course Alarm on the Alarms main menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Off Course Alarm setting. (Off, 30 to 3000 feet, 10 to 1000 meters [International Models Only], Default = 300 ft, 100 m) Arrival Alarm Circle... -
Page 19: Units - Distance
Units - Distance Units - Distance selects the units of measure for all distance- related readouts. To change the Units - Distance setting: 1. Highlight Units - Distance on the Setup menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Distance setting. (Domestic Models: Statute Miles, Nautical Miles;... -
Page 20: Position Format (Advanced)
Position Format (Advanced) Position Format selects the format of the latitude and longitude position display. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.) NOTE: See Setup Menu Tab: User Mode in your Matrix Fishing System Operations manual. To change the Position Format setting: 1. -
Page 21: Troubleshooting
Troubleshooting Before contacting the Humminbird® Customer Resource Center, please read the following section. Taking the time to review these troubleshooting guidelines may allow you to solve a performance problem yourself, and therefore avoid sending your unit back for repair. Fishing System Doesn’t Power Up If your Matrix Fishing System doesn’t power up, use the Installation Guide that also comes with it... -
Page 22: Finding The Cause Of Noise
This accessory requires the MSWindows-compatible HumminbirdPC™ software downloaded from our website to your PC in order to communicate with the Matrix Fishing System. Be sure to check out our website www.humminbird.com for additional new and exciting accessories to grow your Matrix Fishing System! NOTE: Each accessory requires a separate purchase. -
Page 23: Contact Humminbird
Contact Humminbird® 334-687-0503 custserv@techsonic.com Techsonic Industries, Inc. Service Department 108 Maple Lane Eufaula, AL 36027 USA...