Setup Menu Tab; Units - Depth; Units - Temp (International Only); Units - Distance - Humminbird 383c Operation Manual

531450-1_A - 383c_Eng.qxd 11/18/2005

Setup Menu Tab

From any view, press the MENU key twice to access the
tabbed Main Menu System, then press the RIGHT cursor
key until the Setup tab is selected.
NOTE: Menu choices will vary depending on system settings
such as whether the unit is set for Advanced User mode and
what accessories are attached to the unit.
Setup Menu Tab
2:38 PM Page 82
75

Units - Depth

Units - Depth selects the units of measure for all depth-
related readouts.
To change the Units - Depth setting:
1. Highlight Units - Depth on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Depth
setting. (Meters [International Models only], Feet, Fathoms; Default is Meters
for International models, and Feet for Domestic models)
Units - Temp
(International only)
Units - Temp selects the units of measure for all temperature-related readouts.
International Models only.
To change the Units - Temp setting:
1. Highlight Units - Temp on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Temp
setting. (Celsius, Fahrenheit; Default = Celsius)

Units - Distance

Units - Distance selects the units of measure for all
distance-related readouts, and will appear in the menu if a Temp/Speed Accessory is
connected and the paddlewheel has moved at least once, or if the GPS Receiver is
connected.
To change the Units - Distance setting:
1. Highlight Units - Distance on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Distance
setting. (Domestic Models: Statute Miles, Nautical Miles; Default = Statute
Miles; International Models: Meters/Kilometers, Meters/Nautical Miles,
Feet/Statute Miles, Feet/Nautical Miles; Default = Meters/Kilometers)
76