Setting The Humidity Level; Starting Therapy; Stopping Therapy - ResMed C-Series User Manual

Setting the Humidity Level

The aim of humidification is to deliver moist air to your mask, but to avoid having
condensation form in the air tubing. The temperature and humidity of the surrounding
air will affect the setting you need.
You can adjust the humidity setting at any time before or during therapy, to find the
most comfortable and effective setting.
To set the humidity level press
displays "H" and the selected humidity level (eg, H. 3).
The OFF setting switches heated humidification off and delivers minimum
humidification. A setting of 6 delivers maximum humidification.
The humidification setting remains displayed on the screen for five seconds.

Starting Therapy

1. Connect one end of the air tubing firmly onto the air outlet of the water chamber
and the other end to your mask.
2. Fit your mask as described in your mask user instructions.
3. If necessary, set the humidity level as described in the section "Setting the
Humidity Level".
4. Press
heating indicator on the flow generator lights when the humidifier is on.
5. Lie down and arrange the air tubing so that it is free to move if you turn in your
sleep.
WARNING
!
Do not leave a long length of air tubing around the top of your bed. It could
twist around your head or neck while you are sleeping.

Stopping Therapy

To stop your therapy at any time, remove your mask and press
generator.
4
on the flow generator to start therapy. Therapy starts straight away. The
or on the flow generator; notice that the screen
on the flow