Adjusting Humidity Level; Warming The H5I - ResMed H5i S9 Series Welcome Manual

Adjusting humidity level

Ranging from OFF to 6, you can adjust the humidity level at any time to find the setting that is most
comfortable for you. To adjust your level of humidity:
1. From your HOME
screen, turn
until the HUMIDITY
LEVEL screen is
displayed in blue.

Warming the H5i

The warm-up feature is used to pre-heat the water before starting treatment.
To start warming:
1. Navigate to the humidity level icon.
2. Push and hold
is displayed.
You can stop warm-up at any time by pressing
seconds. You can start treatment at any time by pressing
Note: In order to assist the heater plate in cooling, your S9 device will
continue to blow air for up to an hour after treatment has stopped.
However, you can unplug the device from the power outlet at any
time and allow the heater pate to cool without air flow.
2. Press . The
selection is
highlighted in
orange.
for three seconds. The Warming Up status bar
3. Turn until the
humidity level
that you require is
displayed.
for at least three
.
4. Press to
confirm your
choice.
English
5