Motion Configuration - Swann DVR16-8600 User Manual

16 channel h.264 dvr

Hide thumbs Also See for DVR16-8600:

Table of Contents

Buzzer hold time(S): set on board buzzer time after alarm triggered.

4.2.6 Motion Configuration

Click MOTION to enter motion configuration as Fig 4.11 Motion Configuration.

Here users can set motion sensitivity, detection area and alarm out. The following are the definitions of every option.

Enable: enable motion detection.

Trigger: setup similar with that of sensor alarm. But linked speed domes must be different front current channel. I.e.

now users enable motion detection of camera1, the linked speed domes must be camera2-16.

Area: set sensitivity and motion detection area. It supports multi detection area as Fig 4.12 Detection Area

Configuration. Click the blocks or drag mouse to enable or disable. Red means unchecked, transparence means

available. Click Save to save and exit.

Digital Video Recorder User Manual

Fig 4.11 Motion Configuration

Table of Contents

Dvr16-8600 plus