Remote Controller - Swann DVR16-8600 User Manual

Notice: The power in series must be 277VAC/10A or 30VDC/10A or below

2.4 Remote Controller

Insert the two included batteries into the Remote.
Open the battery cover of the Remote Controller
STEP1
Place batteries. Please take care the poles (+ and -)
STEP2
Replace the battery cover
STEP3
Notice: Frequently defect checking as following
1. Check batteries poles
2. Check the remaining charge in the batteries
3. Check IR controller sensor is mask
Digital Video Recorder User Manual
Fig 2.9 Alarm Output Connection
11