Ptz Control - Swann DVR16-8600 User Manual

About network backup, please refer to 6.3.2 Remote Backup.

3.6 PTZ Control

Please connect speed domes to the DVR via RS485 first, referring to 2.3.1 Rear Panel Interface. And make sure the
speed dome has the protocols this DVR supports and set the parameters according to its manual.
Press right mouse to show the control bar. Enter Menu---->System--->P.T.Z, see Fig 3.26.
STEP1
Set protocol, baud rate, address according to the parameters of the speed dome.
STEP2
Click Set button at right of Preset. Here users can set presets as Fig 3.27 Set Presets. Adjust the speed
STEP3
dome. Select a preset and click Save to a preset. Users can set 16 presets totally.
40
Digital Video Recorder User Manual
Fig 3.26 PTZ Setup