Enter TOOLS configuration, referring to 4.2.10 Tools Configuration.
STEP1
click Load default. Select setup blocks, referring to Fig 5.2 Reset Blocks.
STEP2
Press OK to do default. It will return to TOOLS interface after finished.
STEP3
5.4 Check System Information
Users can check system information like firmware version, IP address and etc.
Press right mouse to show the control bar. Click Menu, referring to Fig 4.2 Up-listed Menu.
STEP1
Click Info, the window below will appear.
STEP2
Click System, the window below will display. Check firmware version, recording parameters here.
STEP3
Digital Video Recorder User Manual
Fig 5.3 Status Interface
67