Splitting The Project During Recording; Splitting Manually; Specifying The Project Size For Automatic Splitting - Roland R-26 Owner's Manual

Splitting the Project
During Recording
You can split the project during recording.
If you've split the project, it will be easy to
start playback from a division point.
When you're making a continuous
recording for an extended period of
time, you may find it desirable to split the
project at points that will be convenient for
searching.

Splitting manually

1.
Start recording .
2.
Touch the MARK tab (p . 17) .
3.
At the moment you want to assign a
marker, touch <SPLIT> .
Specifying the Project Size
for Automatic Splitting
The R-26 will automatically split the
project being recorded when it reaches a
specified size. By default, the project will
be automatically split when the file size
reaches 2 GB.
1.
Choose [MENU]
Ú
<MAX FILE SIZE> .
"MAX FILE SIZE" is located on page 3/3.
Touch to access 3/3.
2.
Select the file size for automatically
splitting .
Setting Description
64 MB
128 MB
256 MB
Size at which project will
be automatically split
512 MB
1 GB
2 GB
* The maximum size of file that the R-26
can handle is 2 GB.
Recording
<REC SETUP>
Ú
51