Setting The Input Sensitivity; And Input Level - Roland R-26 Owner's Manual

Recording
5.
Touch <OK> to exit from the MIC
MODE SETUP .
6.
Touch <BACK> return to the main
screen (p . 16) .
Setting the Input
Sensitivity and Input Level
Here's how to adjust the sensitivity and
input level of the recording source.
Adjusting the input sensitivity
1.
From the main screen, press the
panel's [SENS] button .
2.
In the display, touch the <SENS>
slider .
If you're adjusting multiple recording
sources when using 4 channels or 6
channels, touch the tab for the recording
source that you want to adjust, and then
touch the <SENS> slider.
44
3.
Touch
sensitivity .
REC SOURCE
INTERNAL/XY MIC/OMNI
MIC/PLUG IN
ANALOG
4.
Touch <BACK> twice to return to the
main screen (p . 16) .
to adjust the
Setting
HIGH
MID
LOW
-62 dBu
-56 dBu
-50 dBu
-44 dBu
-38 dBu
-32 dBu
-26 dBu
-20 dBu
-14 dBu
-8 dBu
-2 dBu
+4 dBu