Repeatedly Playing A Portion; Of A Project - Roland R-26 Owner's Manual

Playback
Repeatedly Playing a
Portion of a Project
The AB Repeat function lets you repeatedly
play a specified portion of a project. You
can use this to repeatedly hear a section of
interest.
1.
In the main screen, touch the A-B
SPEED tab .
2.
Press [ ] button to play the
project .
3.
Specify the beginning of the repeat
(point A) .
During playback, touch <
point will be the beginning (point A) of the
repeated portion.
66
4.
Cancelling the setting
> That
Specify the end of the repeat (point
B) .
During playback, touch <
point will be the end (point B) of the
repeated portion, and repeat playback
between A-B will begin.
If point A and point B are already specified,
touching <OFF> will clear the point A and
B settings.
To stop playback, press the [ ] button. The
repeat playback settings (points A and B)
will be retained, but playback will stop.
MEMO
• If you've set point A and do not set
point B before playback reaches the
end of the project, playback will repeat
between point A and the end of the
project.
• The repeat settings will be cancelled
if you use [ ]/[
another project.
>. That
] buttons to select