Analog In Settings - Roland R-26 Owner's Manual

Recording
5.
Choose the upper boundary of the
frequency range to be cut .
Setting
100 Hz
200 Hz
400 Hz
6.
Touch <BACK> twice to return to the
menu screen (p . 18) .
TIPS
The limiter and low-cut filter can be
turned on/off while in the recording-
standby mode or during recording.
1.
During recording or in the recording-
standby mode, choose the INFO tab
and press <LCF/LMT> .
38
2.
Touch the <LOW CUT> or <LIMITER>
icon to turn it on/off .

ANALOG IN Settings

Here you can make settings for the ANALOG
IN 1/L jack and ANALOG IN 2/R jack input
type, phantom power supply, and MS mic.
Set the limiter and low-cut filter settings in
the same way as for the internal mic (p. 36).
Setting the input type
The two inputs can be used as monaural x
2 or as stereo x 1. In addition, you can also
use an MS type stereo mic.
1.
Choose [MENU]
SETUP> <ANALOG IN> .
Ú
2.
Touch <INPUT TYPE> .
<INPUT
Ú