Avaya 1165E User Manual page 95

Figure 20: Headset menu item display
To enable a USB headset
Making a change in the
Note: Press the
Press Exit to discard any changes.
1. Select USB from the
2. Select the Enable HID Commands
supported headsets.
Note: The following two steps applies only if the Avaya Headset
Adapter is connected. You can select the Headset Type only for the
Avaya USB Headset Adapters. If the Avaya USB Headset Adapter is
not detected, the Headset Type selection is disabled, and cannot be
modified.
3. Select the Headset type from the following list of headsets:
• DuraPlus-B (GN Netcom DuraPlus Binaural Headset)
• DuraPlus-M (GN Netcom DuraPlus Monaural Headset)
• GN2020 (GN Netcom GN2020 NC Monaural Headset)
Headset menu page takes effect immediately.
Apply button to make the changes permanent.
Active Headset Device
Configuring Local Menu options
list.
check box to provide full HID for
95