Altec Lansing inMotion iMT630 User Manual page 8

WARNING Use of another AC adapter may damage the product. Use only
the supplied AC adapter.
How to Charge the Lithium-Ion Battery
Your Altec Lansing inMotion iMT630 speaker system includes a
rechargeable lithium-ion battery. This battery should be fully charged before
initial use of the speaker system. A full charge, indicated by a solid green
power LED, will provide up to 7 hours of continuous playing time.
When the power LED turns amber, you should recharge the battery. When
the power LED turns red, the speaker system is about to automatically shut
down.
6
Connect the speaker system to a wall outlet.
See the How to Install the AC Adapter section. The power LED will
blink green to indicate that the battery is charging.
7
Allow the battery to charge.
Charging time: Up to 4 hours for a full charge. When the battery is
fully recharged, the power LED will light solid green.
During the charging process, it is typical for the battery to
WARNING
become warm. To be safe, keep flammable materials away from the
speaker system.
6
Power LED status indicator
Power LeD Meaning
Blinking green Your iMT630 speaker system is charging.
Your iMT630 battery is fully charged and the speaker
Solid green
system is running on battery power.
Your iMT630 battery's charge is low and the speaker
Solid amber
system is running on battery power.
Your iMT630 battery's charge is critically low and the
Solid red speaker system is about to automatically shut down
from running on battery power.
There is a battery error, such as the battery is not
Blinking red
connected.